|
|
Series 3000 XPIS
|
Price: Call For Pricing & Configuration
Manufacturer: Honeywell Analytics
Product Options
| |
Personalization
* denotes required field
If Not Shown Above, Type Gas Required Here
|
Call for Best Pricing & Discounts - 866-451-2257
All Series 3000 XPIS Units and prices above include a UL/cUL Approved toxic and oxygen transmitter.
**NOTE: More Configurations Available, Please Call 866-451-2257 or 805-576-7625 for More Information**
The Series 3000 XPIS fixed gas detection monitor provides comprehensive monitoring of toxic and oxygen gas hazards in potentially explosive atmospheres, both in and out of doors. This low powered gas detector operates on an industry standard 2-wire 4-20mA loop, making it ideal for both new and retrofit applications. Users can configure the detector without the need of a 'hot work permit' by using the LCD and magnetic switches. Fault diagnostic software and programmable calibration due frequency simplifies maintenance procedures.
The Intrinsically Safe smart sensors are supplied pre-configured and can be 'hot swapped' without having to remove power to the detector, saving time and money during commissioning and routine servicing. A remote sensor mounting kit is available that allows sensor to be mounted up to 50' (15m) from the transmitter, making it ideal for operation in areas that are difficult to access.
Reliable Detection
-
Proven electrochemical sensing technology
-
Uses Surecell(TM) electrochemicl cells, ideal for hot and humid environments
-
Long Life, typical 2-5 years
Installation/Maintenance Cost
-
Explosion proof transmitter allows field wiring to be run along with other non IS instruments
-
Plug-in sensor removes wiring
-
IS sensor connection permits hot swap, reducing down time
-
User programmable calibration frequency
Typical Applications
-
Exploration and drilling platforms
-
Production platforms
-
Onshore oil and gas terminals
-
Refineries and chemical plants
-
Power Plants
-
Waste water facilities
Digital Gas Controller
The Honeywell HA71 16 Channel Digital Gas Controller is a Class 1 Division 2 controller designed to provide simultaneous display and alarm functions for up to 16 input variables. A graphic LCD displays monitored data as trends, bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. A horn relay may be set for steady or pulsing operation. Analog inputs may be accepted and conditioned via sensor specific analog input cards. Alternatively, the standard Modbus Master port allows input data to be retrieved from Modbus slave devices including the many Modbus compatible Honeywell Analytics sensor transmitter products.
Please call 866-451-2257 or 805-576-7625 for Your Complete Configuration
|
Product Reviews
|
Now Accepting
Or Fax Purchase Order to
(805) 576-7629
T-400Call For Pricing and Quote
|
|
|